Acuracy and blistering speed the only way to fly!

  
 
         The model puts the high-speed machining. Our fastest and most accurate the DATRON provides blistering feed rates up to 1,000 i.p.m. When close tolerances and optimized cycle times are a necessity, the DATRON is the only answer. A water-chilled 60,000 RPM spindle and a laser calibrated guidance system insures tight tolerances and accuracies within .0005 In high-volume production where seconds off a cycle time can make the difference in meeting .production -demands, the value of the DATRON is very easily-Justified. Surprisingly, our top-of-the line high speed machining system is quite affordable_- especially when compared to competing machining systems with similar specifications. This system is ideal for military, aerospace and medical industries. Plus, with spindle run out of less than 5 microns, this machine is the clear choice for micro-drilling applications
  
     
  Plus an integrated Ethanol-Mist Coolant System provides superb surface finishes and eliminates secondary processes like de-burring or degreasing to further speed production times.
  
     
  Other options include various spindles up to4.5kw and up to 60,000 RPM, 4 and 5th axes, a pick and place system,Several 3D probing options, integrated edge-finding capabilities and Z-height surface mapping.
  
     
  Work holding? It's in there.
The first DATRON machine to include the proprietary Quick-Pallets work holding technology as a built-in and standard feature - providing manufacturers with reduced job setup and job changeover times. A lightweight, manual pallet changer facilitates batch machining and unattended" lights- out" production rather than single -part production		  
  Next Generation Precision High-Speed CNC Machining:
  
 
  • Cut your production times in half
  • Eliminate de-burring and de-greasing operations
  • Increase your capabilities
  • Superb surface finishes
  
     
  You just can't hurt it.
Your operator can't bend the ball-screws or the ways. Our high-speed digital-servo drives constantly monitor the resistance of the axis. Should the load on a drive ever increase beyond what the machine would normally encounter during operation, the machine just stops. It is our efficient way to protect your investment. Even during "lights...out" production, if a tool breaks, it can be automatically replaced so that production quickly picks up where it left off - saving both time and costly blanks		  
     
  Precision and control at your fingertips.
Datron's Microsoft Windows - based controller works with virtually any CAD/CAM software and offers Ethernet networking capability, as well as remote monitoring and control, allowing the machine to seamlessly intergrate into any manufacturing environment. Plus, it offers easy to use 'canned cycles', an intuitive control that utilizes look ahead buffers, and diagnostic features. The integrated, hand held pendant is designed for easy control and operation		  
     
  The science of integrated workholding
To insure X,Y,Z location repeatability, the Datron's standard Quick-Pallets are registered using a beveled-boss in cavity system. When placing the pallet on the machine bed, it will be located in exactly the same position every time. A standard feature, vacuum pump holds the pallet in place during machining operations. Changing a pallet requires no tooling or clamping, reducing setup time from an average of 30 minutes to 30 seconds
- making the Datron ideal for frequent or interrupted job changes.