Module clamping plates

MS-P

Clamping devices, such as vices or workpieces, can be fastened to module clamping plates. The modules are fastened on the machine table either with a screw connection or with the vacuum suctioning system.

T-slot module clamping plates

MS-TN

The T-slot module clamping plate offers room for application-specific fastening solutions or the combination of a short-stroke clamping element and fixed clamping jaw.
The modules are fastened on the machine table either with a screw connection or with the vacuum suctioning system. If several T-slot module clamping plates are arranged next to each other, the two- and three-row ones must alternate, or a gab of 50 mm will be formed. If you would like to completely fit your machine with a table cut-out with T-slot plates, please select the table upgrade MS-TNA.

T-slot table upgrade

MS-TNA

In order to take advantage of the high flexibility of T-slot clamping systems even on the milling machines M8, M8XL, M35, M85 and M10, the machine table can be upgraded with four T-slot module clamping plates. The modules can be alternatively fastened with screws or with the vacuum suctioning system.

 

Vacuum module clamping plate

MS-VP-A

Take advantage of the vacuum force! DATRON vacuum module clamping plates offer maximum clamping force and simplest handling. The vacuum module clamping plates are available in different sizes. They are divided up into segments which can be operated separately from each other with a vacuum distributor. Several identical or even different workpieces can be set up simultaneously. The special DATRON cardboard VacuCard™ distributes the vacuum unter the workpiece and also acts as sacrificial layer.

 

Vacuum module clamping plate

MS-VP-B

The DATRON vacuum module clamping plate is divided into two clamping areas. These can be activated separately from each other with a vacuum distributor..

 

 

Vacuum modul clamping plate

VacuPlate

The DATRON VacuPlates™ are the result of many years of experience in vacuum clamping technology.

 

Wedge clamping element

KSE

The wedge clamping elements can be configured for single as well as for multiple clampings. Due to their clamping screw and the T-nut, they can be flexibly used on the DATRON T-slot plate. The compact design allows the work area to be optimally used.

 

 

 

Flat clamping system

Qwik-Lok

DATRON puts its trust in innovation when it comes to manual clamping technology. In order to overcome the limits of conventional workpiece clamping and to completely exploit the technical capabilities of DATRON milling machines, the flat clamping system offers very good solutions. Both single-part clampings as well as double-clampings are possible.

Pneumatic Clamping Technology

Short-stroke clamping element for automatic clamping operation

KSE-AS

Set-up times can be reduced drastically with the new module clamping technique of DATRON. Module plates which locate via conical centring sleeves are directly locked in position by vacuum on the table (M8) or on a base plate. The ad- vantage lies in an extremely quick change of clamping modules and the high repetitive accu- racy of the clamping position of a few hundredths of a millimetre. Naturally the modules can also be screwed up in the conventional manner.